Grip-Rite Electrogalvanized 18GA 1/4”x1-1/2” L-Style Narrow Crown Staples 1000pk

Name: Grip-Rite Electrogalvanized 18GA 1/4”x1-1/2” L-Style Narrow Crown Staples 1000pk
SKU: 132928
Availability: InStock

$17.84

SKU: 132928 Categories: Fasteners, Hardware, Staples

In stock

Free Store Pickup
Available for MO, AR, KS, OK addresses at checkout
Shipping

Ships to lower 48 (excl. CA) on eligible items.
Local Delivery
Order first; we’ll call you to schedule a time
Shop In-Store
Open Mon–Sat, 8 am–6 pm for all items.

Grip-Rite Electrogalvanized 18GA 1/4”x1-1/2” L-Style Narrow Crown Staples are a solid fastener choice for detailed finish work where you need a strong hold without a massive footprint. When you are tacking down cedar lattice or securing thin soffit panels, these staples sink cleanly into the wood, leaving a small profile that is easy to hide with a bit of filler. They offer a firm grip that resists pulling through the material, which is a lifesaver when working with softer woods that tend to split under larger nails. Because they are designed for L-style staplers, they feed through your tool smoothly, reducing those frustrating jams that can slow down a Saturday morning project.

Key Features of Grip-Rite Electrogalvanized 18GA 1/4”x1-1/2” L-Style Narrow Crown Staples

Electrogalvanized coating provides a layer of protection against rust for indoor and sheltered outdoor projects

Narrow crown design minimizes wood splitting when working close to the edge of a board

Sharp chisel points drive straight and deep with less force required from your pneumatic tool

Fine 18-gauge wire leaves a tiny entry hole that requires very little sanding or wood putty

Glued collation keeps the strips together in your tool bag to prevent loose staples from cluttering your workspace

Compatible with most major brands of L-style narrow crown staplers for easy tool matching

Long 1-1/2 inch leg length offers plenty of penetration for securing thicker trim and baseboards

Consistent manufacturing ensures every staple in the pack maintains the same driving depth

Additional Information

Brand: Grip-Rite

Product Type: Narrow crown staples

Model:

Product Use: Fastening trim, cabinetry, paneling, furniture, and general finish carpentry

Size:

Material: Steel with electrogalvanized finish

Height: 1-1/2 inch leg length

Length: 18 gauge wire

Width: 1/4 inch crown

Check your air compressor’s regulator to ensure you aren’t overdriving these staples, as sinking the crown too deep can actually weaken the connection in soft plywood. For an exterior project like a birdhouse or a garden trellis, I recommend adding a quick dab of exterior-grade wood glue along the seam for extra security against high humidity. Always test a few staples on a scrap piece of your actual project material first to dial in your depth settings. To prevent the chemicals in pressure-treated lumber from eating through the galvanization over time, I suggest avoiding its use in those specific types of boards.