Heavy Duty Auger with Tip/Cutting Edges 12″x48″

Name: Heavy Duty Auger with Tip/Cutting Edges 12"x48"
SKU: 151557
Availability: InStock

$139.86

SKU: 151557 Categories: Auger Bits, Farm Equipment, Farm Supplies

In stock

Free Store Pickup
Available for MO, AR, KS, OK addresses at checkout
Shipping

Ships to lower 48 (excl. CA) on eligible items.
Local Delivery
Order first; we’ll call you to schedule a time
Shop In-Store
Open Mon–Sat, 8 am–6 pm for all items.

Heavy Duty Auger with Tip/Cutting Edges is the tool you pull out when you need to dig serious, clean holes quickly. This 12-inch by 48-inch auger is constructed with thick flighting and a reinforced hub, making it noticeably heavier and more robust than standard augers. The design incorporates bolt-on, replaceable cutting edges and tip, ensuring it maintains aggressive performance in compacted soil and light rocky ground. It’s the perfect size for setting large corner fence posts, deck footings, or planting sizable trees, and it’s built to last on your 3-point hitch or skid steer digger.

Key Features of Heavy Duty Auger with Tip/Cutting Edges

12-inch diameter is suitable for setting four-by-four posts with concrete or large diameter footings

Features easily replaceable cutting edges and pilot tip for consistent digging power

48-inch length provides the depth needed for frost lines and stable post anchoring

Thick steel flighting (typically 5/32 inches) increases rigidity and soil carrying capacity

Designed to fit most post hole diggers with a standard 2-inch round output shaft

The reinforced hub connection adds strength where the most torque is applied

Cuts through tough dirt, compacted clay, and light gravel with sustained force

Bolt hole spacing is commonly 2 inches center-to-center for easy fitment

Additional Information

Brand:

Product Type: Earth Auger Bit

Model:

Product Use: Digging Deep Post Holes

Size: 12 inch (diameter)

Material: High-Strength Steel

Height:

Length: 48 inch

Width: 12 inch

Before digging, check the auger’s flighting thickness; for heavy clay or soil with gravel, thicker flighting like 5/32 inches is vital to prevent bending. When you hit tough ground, don’t just lean on the implement; instead, raise the auger slightly to clear debris from the hole before plunging back down. This cleans the cutting edges and tip, allowing the auger to bite more effectively into fresh soil and minimizing the strain on your PTO or hydraulic drive unit. Always keep a spare set of cutting edges and tips handy for quick replacement on the job site.